Christie LX400 Manual page 62

NETWORK Menu
NETWORK Menu (continued)
Item
e-SHOT
(continued on next page)
LX400 User Manual - Operating Guide
Selecting this item displays the e-SHOT
menu.
The application software "PJTransfer"
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
e-SHOT ( e-SHOT (Still Image Transfer) Display of the User'
s Manual - Network Guide) and the ► or ENTER button to display
the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source file in the projector.
(1) Press the RESET button on the
remote control while displaying
an image to display the e-SHOT -
RESET menu.
(2) Press the ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
To stop erasing, press the ESC button on the remote control or
the ◄ button on the projector.
Description
58
020-000169-03 Rev. 1 (11-2010)