Service - Christie LX400 Manual

NETWORK Menu
NETWORK Menu (continued)
Item Description
Selecting this item displays the NETWORK -INFORMATION- dialog
for confirming the network settings.
INFORMATION
• The PROJECTOR NAME is displayed.
• Nothing (blank) is shown in the "PROJECTOR NAME" field until
57).
you setup the item (
• When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
64).
date and time are input. Replace the battery suitably (
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
"0.0.0.0" when DHCP is ON and the projector has not gotten
address from DHCP server.
Executing this item restarts and initializes the network functions.
Choose the RESTART using the button ►.
Then use the button ▲ to execute.

SERVICE

Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, NETWORK menu may not be controlled
approx. 30 seconds.
59
LX400 User Manual - Operating Guide 020-000169-03 Rev. 1 (11-2010)