Setup - Connection 2 - Bosch Divar 700 Series Installation And Operation Manual

90 en | Advanced configuration
6.9.3

Setup - Connection 2

Figure 6.19 Configuration menu - Network - Setup - Connections
Set up the network parameters for the secondary Ethernet port.
–
–
–
–
F.01U.246.471 | v3.4 | 2011.06
Enable DHCP to have IP address, subnet mask, and default gateway assigned
automatically by the network DHCP server. The actual values are displayed.
If DHCP is disabled, fill in the IP address, and the Subnet mask.
The MAC address is read only; it shows the MAC address of the Ethernet adapter.
Connection shows the status of the physical network connection.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems