68
en | Advanced configuration
Control tab
–
–
6.2.2
IP Channels
A General tab and a Control tab are available for each camera.
Note:
An IP stream must only be connected to a single channel on a single Divar. There should be no
connection to any other device that could influence the settings of the IP device.
Figure 6.5 Configuration menu - Video & Audio - IP camera
IP camera
If an IP connection has already been configured, the IP address, input type, and stream
number is displayed. If a connection has already been established, a video preview appears.
F.01U.246.471 | v3.4 | 2011.06
Enable PTZ when a controllable camera is connected. By default, PTZ is disabled.
Select protocol and device address on PTZ bus. (PTZ commands are transmitted across
the RS485 and Biphase bus simultaneously. Each camera should have a unique address
greater than 0.)
Installation and Operation manual
Divar 700 Series
Bosch Security Systems