Divar 700 Series
Manual setup
Figure 6.6 Configuration menu - Video & Audio - IP camera manual setup
1.
2.
It can take a few seconds to establish a successful connection, after which a video preview
appears.
Bosch Security Systems
Click Manual setup ... to configure or change an IP camera connection.
–
IP address - enter the IP address of the IP camera.
–
Input - Choose Camera for a camera or a single-channel encoder. Choose Video line
1-4 for a multi-channel encoder.
–
Stream - enter the stream number.
–
Encoder profile - Displays the encoder profile of the IP device.
–
Username/Password - enter the username and password if applicable.
Press OK to confirm settings.
Installation and Operation manual
Advanced configuration | en
F.01U.246.471 | v3.4 | 2011.06
69