Network - Bosch Divar 700 Series Installation And Operation Manual

22 en | Quick install
3.3.4

Network

Figure 3.5 Quick install menu - Network
Fill in the settings that control the behavior of the unit with respect to a network.
DVR name — Enter a unique DVR name to be used in the network.
DHCP — Enable DHCP to have IP address, Subnet mask, and Default gateway assigned
automatically by the DHCP server of the network. The actual values are displayed.
IP address — Fill in the IP address when DHCP is not enabled.
Subnet mask — Fill in the Subnet mask when DHCP is not enabled.
Default gateway — Fill in the Default gateway when DHCP is not enabled.
Auto DNS address — Enable to have the DNS server IP address assigned automatically. The
assigned address is displayed.
DNS server — Fill in the DNS server address when Auto DNS address is not enabled.
MAC address — The MAC address is read only.
Connection — Shows current network speed of the primary Ethernet connection.
Remote streaming limit — Enter a value between 0 and 1000 Mbps to restrict the network
bandwidth available for streaming audio and video to all BVC workstations combined.
F.01U.246.471 | v3.4 | 2011.06 Installation and Operation manual
Divar 700 Series
Bosch Security Systems