Bosch Divar 700 Series Installation And Operation Manual page 42

42 en | Operating instructions
Multiscreen
To view different multiscreen displays on monitor A or B:
1.
2.
Full-screen
To view a full-screen shot of a camera:
1.
2.
Note:
IP camera numbering starts at 9 on an 8-channel hybrid model and at 17 on a 16-channel
hybrid model. So on a 16-channel hybrid unit with IP cameras, camera key 1 selects analog
camera 1 and, when pressed again, IP camera 17.
Sequence
To view a sequence of live camera pictures (full-screen or multiscreen) of several cameras:
1.
2.
Cameo assignment
Assigning cameras to cameos in a multiscreen view:
1.
2.
3.
The cameo assignment that was made is used in playback mode as well as in live mode.
Freeze image
Freezing a camera shot on monitor A:
1.
2.
When viewing a camera picture in full-screen mode, then this picture is frozen. The zoom
function can be used on a frozen picture. When changing viewing mode, any frozen pictures
are released.
F.01U.246.471 | v3.4 | 2011.06
Press the multiscreen
– A multiscreen display of camera pictures appears on the active monitor.
– The camera keys of the selected cameras light (green).
Press the multiscreen
– Continue to press the multiscreen
multiscreen views.
Press a camera key.
– A full-screen shot of the selected analog camera appears.
– The camera key of the selected analog camera lights (green).
– Press the camera key again to display the linked IP camera.
– The camera key of the selected IP camera lights (orange).
While in multiscreen mode, press enter
Press the sequence
– A sequence of camera pictures appears, each for a pre-programmed dwell time.
Press the sequence
– Zooming, pressing the multiscreen key, or selecting a single camera also stops
sequencing.
Use the arrow keys to select a cameo.
Press and hold a camera key to display and assign that camera's picture in the active
cameo.
Alternatively, right click a cameo with the mouse and choose a video input from the
context menu.
Press the freeze key to freeze the picture in the active cameo.
Press the freeze key again to return to live viewing.
Alternatively, right click and select Freeze or Unfreeze from the context menu using the
mouse.
Installation and Operation manual
key.
key again to go to the next programmed multiscreen view.
key; the unit cycles through all enabled
to view the active cameo in full-screen.
key.
key to stop sequencing.
Divar 700 Series
Bosch Security Systems