Copy - Bosch Divar 700 Series Installation And Operation Manual

Divar 700 Series
Note:
If Event only recording has been selected under the Normal tab, then the pre-event time also
applies for contact, motion and text recordings.
6.4.5

Copy

The copy recording settings function makes it easy to set up recording for all profiles and all
cameras. The copy function copies content from within a single profile to other profiles. The
camera inputs and the recording modes within each of these profiles can be selected.
To copy recording settings:
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems
Check the Copy multiple cameras box to copy several camera inputs within the From
profile.
Select the profile number to copy from.
Highlight the profiles to copy to (highlight the un-numbered box to select all).
Select the camera input(s) to be copied from, for the profile to be copied.
Select the camera inputs to be copied to (hightlight the un-numbered box to select all).
Check only those recording modes (Normal, Alarm or Motion) that are to be copied.
Click Copy.
Installation and Operation manual
Advanced configuration | en
F.01U.246.471 | v3.4 | 2011.06
77