Bosch Divar 700 Series Installation And Operation Manual page 54

54 en | Operating instructions
Sequence
Figure 5.15 Configure monitors menu - Sequence
Select the length of time a camera remains visible on screen (1 to 60 seconds) in the
Sequence dwell time field.
Use the the Add button to move camera inputs or multiscreen views to the sequence list. Use
the Move up or Move down buttons to put them in the desired order. Use Remove to clear a
single item from the sequence list. Use Erase to clear all items from the sequence list.
Note:
When a HD camera is part of the sequence list, it is not shown during sequencing because HD
camera display is not supported on the local user interface.
F.01U.246.471 | v3.4 | 2011.06 Installation and Operation manual
Divar 700 Series
Bosch Security Systems