Bosch Divar 700 Series Installation And Operation Manual page 84

84 en | Advanced configuration
Figure 6.15 Configuration menu - DirectIP text data
DirectIP allows external systems to send text data to the Divar unit for recording with one or
more cameras.
Click Add to define a new source system sending text data
1.
2.
3.
4.
Click on an entry in the list and select Settings to review and update the configuration data of
the particular text source system.
Click on an entry in the list and select Remove to remove the selected text source system
from the list.
Text data coming from a text source system can be recorded with more than one camera. Use
Add to associate the same source system IP address and codepage to a different destination
port and assigned camera. Similarly, use Add to associate more than one text source system
with the same camera.
F.01U.246.471 | v3.4 | 2011.06
Enter the source IP address of the external system that sends the text data or 0.0.0.0 to
accept data from any external system.
Select one of the TCP ports 7100-7131 on which to listen for text data.
Select the codepage used by the source system to encode characters.
Select the camera to store the text data with.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems