Browser Connection; System Requirements; Establishing The Connection - Bosch TINYON IP 2000 WI Software Manual

Camera browser interface
Table of Contents

Advertisement

Camera Browser
Interface
1

Browser connection

A computer with Microsoft Internet Explorer is used to receive
live images, control the unit, and replay stored sequences. The
unit is configured over the network using the browser.
1.1

System requirements

The Web browser must be configured to enable Cookies from
the IP address of the unit.
In Windows Vista, deactivate protected mode on the Security
tab under Internet Options.
To play back live video images, an appropriate ActiveX must be
installed on the computer. If necessary, install
Bosch Video Client. This can be downloaded from the following
address:
http://downloadstore.boschsecurity.com/
1.2

Establishing the connection

The unit must have a valid IP address to operate on your
network and a compatible subnet mask. By default, DHCP is pre-
set at the factory to On and so your DHCP server assigns an IP
address. With no DHCP server the default address is
192.168.0.1
1.
2.
3.
Bosch Security Systems
Network access (Intranet or Internet)
Microsoft Internet Explorer version 9 (32-bit)
Screen resolution at least 1024 × 768 pixels
16- or 32-bit color depth
JVM installed
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions
that appear.
Browser connection | en
2015.01 | v1.59x | AM18-Q0676
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tinyon ip 2000 pir

Table of Contents