Bosch Divar 700 Series Installation And Operation Manual page 33

Divar 700 Series
Figure 4.16 Biphase port connector and connection board
Signal name
Code 1 -
Code 1 +
Shield
Code 2 -
Code 2 +
Shield
Code 3 -
Code 3 +
Shield
Code 4 -
Code 4 +
Shield
Code 5 -
Code 5 +
Shield
Table 4.6 Control port - 15-pole D-type socket
To communicate with the controllable camera, select a port number that is the same as the
input number to which the camera is connected (for example, configure a controllable camera
to port 16 if it is connected to channel 16).
Bosch Security Systems
8
15
BIPHASE
SHIELD
+
CTRL 1
-
SHIELD
+
CTRL 2
-
SHIELD
+
CTRL 3
-
SHIELD
+
CTRL 4
-
SHIELD
+
CTRL 5
-
SHIELD
Pin number Description
1 Biphase control ch. 1 (minus)
2 Biphase control ch. 1 (plus)
3 System ground/cable shield
4 Biphase control ch. 2 (minus)
5 Biphase control ch. 2 (plus)
6 System ground/cable shield
7 Biphase control ch. 3 (minus)
8 Biphase control ch. 3 (plus)
9 System ground/cable shield
10 Biphase control ch. 4 (minus)
11 Biphase control ch. 4 (plus)
12 System ground/cable shield
13 Biphase control ch. 5 (minus)
14 Biphase control ch. 5 (plus)
15 System ground/cable shield
Installation and Operation manual
1
9
F.01U.246.471 | v3.4 | 2011.06
Hardware setup | en 33