4.4.5.1 Q-in-Q Port Setting
The QinQ VLAN \ QinQ Port Setting screen in
The page includes the following fields:
Object
QinQ
QinQ TPID
Port QinQ
QinQ Uplink
Figure 4-4-8
Figure 4-4-8: Q-in-Q Port Setting interface
Description
Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to
Enable:
be configured.
The Managed Switch operates in its normal VLAN mode.
Disable:
The default is for the Managed Switch to function in Disable mode.
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on a
tunnel access port.
• 802.1Q Tag : 8100
• vMAN Tag : 88A8
Default : 802.1Q Tag.
Check: Sets the Port to QinQ mode. Or the port operates in its normal VLAN mode.
Default: Un-check.
Configures IEEE 802.1Q tunneling (QinQ) for an uplink port to another device
Check:
within the service provider network.
User's Manual of FGSW-Series
appears.
78