Igmp Configuration - Planet FGSW-2620VM User Manual

4.8.2 IGMP Configuration

The Switch support IP multicast, you can enable IGMP protocol on web management's switch setting advanced page, then
the IGMP snooping information displays. IP multicast addresses range are from 224.0.0.0 through 239.255.255.255.
The page includes the following fields:
Object
IGMP Protocol:
IGMP Fastleave:
IGMP Querier:
Fast Leave:
The Managed Switch can be configured to immediately delete a member port of a multicast service if a
leave packet is received at that port and the fastleave function is enabled for the parent VLAN. This allows
the Managed witch to remove a port from the multicast forwarding table without first having to send an IGMP
group-specific query to that interface.
Figure 4-8-5: IGMP Configuration interface
Description
Enable or disable the IGMP protocol.
Enable or disable Fast Leave on the port.
Enable or disable the IGMP query function. The IGMP query information will be
displayed in IGMP status section.
106
User's Manual of FGSW-Series