Community Strings - Planet FGSW-2620VM User Manual

•
System Location
•
System Contact
• SNMP Status

4.2.3.3 Community Strings

Community strings serve as passwords and can be entered as one of the following:
The page includes the following fields:
Object
Community Strings:
Add
button
Remove
button
The physical location of this node (e.g., telephone closet, 3rd floor).
The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 32 to 126.
The textual identification of the contact person for this managed node, together
with information on how to contact this person.
The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 32 to 126.
Indicates the SNMP mode operation. Possible modes are:
•
Enabled: Enable SNMP mode operation.
•
Disabled: Disable SNMP mode operation.
Figure 4-2-6: Community strings interface
Description
Here you can define the new community string set and remove the unwanted
community string.
String: Fill the name string.
RO: Read only. Enables requests accompanied by this community string to
display MIB-object information.
RW: Read/write. Enables requests accompanied by this community string to
display MIB-object information and to set MIB objects.
Press the button to add the management SNMP community strings on the
Managed Switch.
Press the button to remove the management SNMP community strings that you
defined before on the Managed Switch.
52
User's Manual of FGSW-Series