[No] Spanning-Tree Debug; Spanning-Tree Protocol-Version; [No] Spanning-Tree Port Mcheck; [No] Spanning-Tree Port Edge-Port - Planet FGSW-2620VM User Manual

show spanning-tree port [<port-list>]
Parameters:
<port-list> specifies the port to be shown. Null means all ports.
The remaining commands in this section are only for system with RSTP (rapid spanning tree, 802.1w) capability:

[no] spanning-tree debug

Description:
Enable or disable spanning tree debugging information.

spanning-tree protocol-version

Description:
Change spanning tree protocol version.
Syntax:
spanning-tree protocol-version <stp | rstp>
Parameters:
stp specifies the original spanning tree protocol (STP,802.1d).
rstp specifies rapid spanning tree protocol (RSTP,802.1w).

[no] spanning-tree port mcheck

Description:
Force the port to transmit RST BPDUs.
No format means not force the port to transmit RST BPDUs.
Syntax:
[no] spanning-tree port mcheck [<port-list>]
Parameters:
<port-list> specifies the ports to be set. Null means all ports.

[no] spanning-tree port edge-port

Description:
Set the port to be edge connection. No format means set the port to be non-edge connection.
Syntax:
[no] spanning-tree port edge-port [<port-list>]
Parameters:
<port-list> specifies the ports to be set. Null means all ports.

[no] spanning-tree port non-stp

Description:
Disable or enable spanning tree protocol on this port.
User's Manual of FGSW-Series
163