Planet FGSW-2620VM User Manual page 28

FGSW-2624SF LED indication
System
LED Color
PWR Green
Per 100Base-FX SFP slot
LED Color
LNK/ACT Green
Per 10/100/1000Base-T port /SFP interfaces
LED Color
LNK/ACT 1000 Green
LNK/ACT 100 Green
LNK/ACT 10 Green
1. Press the RESET button
2. Press the RESET button for about
entire configuration will be erased.
3. The 2 Gigabit TP/SFP combo ports are shared with port 25/26 of FGSW-2620VM / FGSW-2620PVM /
FGSW-2620VMP4 / FGSW-2612PVM / FGSW-2624SF either of them can operate at the same time.
Figure 2-1-10: FGSW-2624SF LED panel
Lights to indicate that the Switch has power.
Lights to indicate the link through that port is successfully established.
Lit: indicate that the port is operating at 1000Mbps.
Off: indicate that the port is operating at 10Mbps or 100Mbps.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the port is operating at 100Mbps.
Off: indicate that the port is operating at 10Mbps or 1000Mbps.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lit: indicate that the port is operating at 10Mbps.
Off: indicate that the port is operating at 100Mbps or 1000Mbps.
Blink: indicate that the switch is actively sending or receiving data over that port.
seconds. The t Switch will reboot automatically.
1-3
10
User's Manual of FGSW-Series
Function
Function
Function
seconds. The Switch will back to the factory default mode; the
28