Reboot Switch; Boot; Reset To Default; Erase Startup-Config - Planet FGSW-2620VM User Manual

6.7.3 Reboot switch

boot

Description:
Reboot (warm-start) the switch.

6.7.4 Reset to Default

erase startup-config

Description:
Reset configurations to default factory settings at next boot time.

6.7.5 TFTP Update Firmware

copy tftp firmware

Description:
Download firmware from TFTP server.
Syntax:
copy tftp firmware <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.

6.7.6 Restore Configure File

copy tftp <running-config | flash>
Description:
Retrieve configuration from the TFTP server. If the remote file is the text file of CLI commands, use the keyword
running-config.
If the remote file is the configuration flash image of the switch instead, use the keyword flash.
Syntax:
copy tftp <running-config | flash> <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.

6.7.7 Backup Configure File

copy <running-config | flash> tftp
Description:
Send configuration to the TFTP server. If you want to save the configuration in a text file of CLI commands, use the
User's Manual of FGSW-Series
154