Product Features - Planet FGSW-2620VM User Manual

1.4 Product Features

Physical Port
FGSW-2620VM
24-Port 10/100Base-TX RJ-45 interfaces
2-Port Gigabit TP/SFP combo interfaces
Reset button for system management
FGSW-2620PVM / FGSW-2620VMP4 / FGSW-2612PVM
24-Port 10/100Base-TX RJ-45 with PoE Injector
2-Port Gigabit TP/SFP combo interfaces
Reset button for system management
1 RS-232 male DB9 console interface for Switch basic management and setup
FGSW-2624SF
24-Port 100Base-FX SFP Fast Ethernet slots
2-Port Gigabit TP/SFP combo interfaces
Reset button for system management
1 RS-232 male DB9 console interface for Switch basic management and setup
Layer 2 Features
Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T / 100Base-TX and Full-Duplex
mode for 1000Base-T ports.
Auto-MDI/MDI-X detection on each RJ-45 port
Prevents packet loss Flow Control:
• IEEE 802.3x PAUSE frame Flow Control for Full-Duplex mode
• Back-Pressure Flow Control in Half-Duplex mode
High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates
erroneous packets to optimize the network bandwidth
8K MAC Address Table, automatic source address learning and ageing
Support VLANs:
• IEEE 802.1Q Tag-Based VLAN
• Up to 255 VLANs groups, out of 4096 VLAN IDs
• Port-Based VLAN
• Q-in-Q tunneling (Double Tag VLAN)
Supports Link Aggregation
• Up to 13 Trunk groups
• Up to 8 ports per trunk group with 1.6Gbps bandwidth (Full Duplex mode)
• IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Cisco ether-Channel (Static Trunk)
Support Spanning Tree Protocol:
• STP, IEEE 802.1D (Classic Spanning Tree Protocol)
• RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Quality of Service
4 priority queues on all switch ports
Traffic classification:
User's Manual of FGSW-Series
15