Step 2 - Install The Modem Driver; Step 3 - Setting Your Country Or Region Code - Multitech MultiModem II MT5600BA-V92 User Manual

Connect the phone to the modem (optional). For voice-only calls, plug a telephone into the
5.
modem's PHONE jack.
Connect the modem to the AC power outlet:
6.
a. Plug the power transformer into an AC power outlet or power strip.
b. Plug the power transformer's cable into the POWER jack on the modem.
Note: Use only the power transformer supplied with the modem. Use of any other transformer
voids the warranty and can damage the modem.
Test the modem by turning it on (a power switch is located on the front panel).
7.
When you apply power, the modem performs a diagnostic self-test, indicated by the TM indicator
lighting for a few seconds, after which the LCD should light. If this does not happen, check that the
power switch is on, the power transformer is solidly connected, and the AC outlet is live. If these
measures do not work, refer to Troubleshooting.

Step 2 - Install the Modem Driver

If you use Windows 2000 or newer, you must install the modem driver. The drivers are installed easily since
Windows supports Plug-and-Play.
With your computer turned off, ensure that your modem is connected properly, and then turn on
1.
your computer. Upon booting up the computer should detect the modem and open Welcome to the
Found New Hardware Wizard screen. On this screen, select Install from a list or specific location.
Click Next.
On the Found New Hardware Wizard screen, check Search for the best driver in these locations and
2.
Install from a specific location. Do Not click Next at this point.
Insert the MultiModem product CD into your CD-ROM drive, when the MultiModem main screen
3.
appears, click Exit. Now, click Next on the Found New Hardware screen.
On the Found New Hardware Wizard screen, click on Search for the best driver in these locations
4.
and Search removable media. Click Next. Windows installs the modem driver.
Click Finish to exit.
5.

Step 3 - Setting Your Country or Region Code

The MT5600BA-V92 modem is a global modem - it can be used all over the world.
However, countries or regions vary in their requirements for how a modem functions. Therefore, you must
configure yours to match the defaults of the country or region in which you are using it. Choose from any of the
three methods:

Using the LCD Panel to Set Your Country or Region Code

Using the Global Wizard to Set Your Country or Region Code

Using AT Commands to Set Your Country or Region Code
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Chapter 3 – Using the Front Panel
10