Assigning Send And Receive Connections To Internal Parties - Gigaset DX800 A User Manual

Configuring the system settings
Assigning send and receive
connections to internal
parties
If you have several connections configured
for your telephone system, you can do the
following for each internal party:
u
Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u
Assign one or several receive connec-
tions. Only calls received via one of the
assigned connections are signalled on
the device.
Assigning a send connection
Prerequisite: Several phone numbers are
configured for your base.
¢ Ï Settings ¢
v
¢
Send Connections
A list of the internal parties (base, handsets,
fax machine INT8 – where applicable) is dis-
played.
q
Select the internal parties that
should be assigned a new send
connection and press the dis-
play key
r
Select Select at each call or an
connection as the send connec-
tion. All configured connections
are displayed with the names
you have set.
§Save§
Press the display key to save the
changes.
Select at each call is only offered if more
than one connection is configured on the
base.
If you select Select at each call, the internal
party can select which MSN is used to estab-
lish a connection every time he makes a call.
136
Telephony
§OK§
.
The Gigaset.net connection is not included
in the selection for the send connections.
Gigaset.net numbers (suffix #9) are automat-
ically dialled via Gigaset.net.
Please note
If the send connection for an internal
party is deleted or deactivated, then
depending on the connection, that party
is assigned either the fixed line connec-
tion or the first ISDN MSN in the configu-
ration as the send connection.
If the base is connected to the ISDN and
no MSN has been configured, the inter-
nal party is assigned the main number
for the ISDN connection.
Making calls via Bluetooth GSM
connection
If you wish to make a call from the base via
the GSM connection of a mobile connected
to the phone via Bluetooth, you must select
either the GSM connection or Select at each
call as the send connection.
For the GSM connection, the name of the
mobile that is currently/was last connected
to the base is displayed in the list of known
devices. When selecting the send connec-
tion, the name of the currently connected
mobile is displayed.
The same applies if you wish to establish
GSM connections via a handset registered to
the base.
Assigning receive connections
Prerequisite: Several connections are con-
figured for your base.
¢ Ï Settings ¢
v
¢
Receive Connections
A list of the internal parties (base, handsets,
local answering machines, fax machine INT8
– where applicable) is displayed.
q
Select the internal parties that
should be assigned new receive
connections and press the dis-
play key
Telephony
§OK§
.