Assigning Send And Receive Connections To Internal Parties - Gigaset N510 IP PRO Manual

The new data for your VoIP provider will be downloaded and saved on the phone.
If you answer the prompt with
not remind you of this new profile again. The message will only be shown again if a newer
version of the provider data is available.
A profile update will only be started if no other profile or firmware update is taking place
at the time.

Assigning send and receive connections to internal parties

If you have several connections configured for your telephone system, you can do the fol-
lowing for each internal party:
u
Assign a send connection or allow the internal party to select the line for each external
call (select line).
u
Assign one or several receive connections. Only calls received via one of the assigned
connections are signalled on the device.
Assigning a send connection
Prerequisite: You have configured at least one VoIP connection on your phone.
¢
Ï Settings
v
A list of handsets is displayed.
q
Select the handset that should be assigned a new send connection and press
the display key
r
Choose Sel. at each call or a connection as the send connection. All config-
ured connections are displayed with the names you have set.
§Save§
Press the display key to save the changes.
Sel. at each call is only offered if more than one connection is configured.
If you select Sel. at each call, you can select the connection you want to use for each call
you make.
Please note
If the send connection on a handset is deleted or deactivated, the first configured VoIP
connection is assigned to it as the send connection.
§No§
, the phone returns to idle status. Your telephone will
¢ ¢
Telephony Send Connections
§OK§
.
Configuring the system settings
81