Table of Contents
Advertisement
First steps
Connecting the base
The following diagram is an overview of all connections for your base.
The individual connections are described in detail below. In order for you to make
calls on your phone via the fixed line and VoIP, you need to connect the base to the
fixed line and Internet (see diagram below).
PC
7
Follow the steps in the order given below:
1. Connect the receiver to the base.
2 Connect the base to the telephone network (analogue fixed line or ISDN).
3 Connect the base to the mains power supply.
4 Connect the base to the router for accessing the Internet (via router and modem
or via router with integrated modem) and for configuring the base via the
Web configurator.
5 You can connect a PC to the base via the second LAN socket LAN2 (optional) –
e.g., for connecting the PC to the router. The base takes on the task of a switch.
6 Connect the base to a fax machine
7 Connect a wire-bound headset to the base.
For instructions on using the headset see
For instructions on connecting and using a Bluetooth headset (see
page 52
12
5
4
and
page
54).
6
3
2
¢
(
page
122).
page
123,
1
page 52
and
page
54.
page
116,
Advertisement
Table of Contents
