Multi-Line Operation And Internal Telephony - Gigaset N670 IP PRO Installation, Configuration And Operation

Multi-line operation and internal telephony

By default, the N670 IP PRO is assigned the All in one role. This means that one SIP account is
assigned to one handset. Internal calls between different handsets registered to the base station
are not possible.
You can switch the device to multi-line operation. In this mode, you can assign multiple SIP
accounts to a handset, e.g. different accounts for incoming and outgoing calls as well as multiple
accounts for incoming calls. This makes it possible, for example, to assign a common phone
number for incoming calls to different members of a team.
In addition, internal free phone calls between handsets are possible in this mode. Participants
can transfer external calls to other participants.
To convert your N670 IP PRO to a multi-line device, do the following:
Reset the device to the All in one + internal telephony - dynamic IP role. All your configura-
tion data will be deleted.
Set up your provider profiles (
Set up all SIP accounts (
Register the handsets with the base station and assign the SIP accounts for incoming and
outgoing calls to the handsets (
When you start the Web configurator for the first time after set up, you can assign the
role All in one + internal telephony - dynamic IP directly to the device on the start
page ( p. 17).
p. 33).
p. 41).
p. 44).
N670 IP PRO – Introduction
9