Table of Contents
Advertisement
Activating/deactivating call waiting
Prerequisite for calls via VoIP: At least two
parallel VoIP connections are permitted on
your telephone (setting can be changed via
the Web configurator).
¢
v
Ç Select Services
Status
Select On / Off to activate/deac-
tivate call waiting.
¤
Press the display key
Call waiting is activated/deactivated for all
connections to the telephone and all regis-
tered devices.
If the base is connected to the analogue
fixed line, it establishes a connection to the
exchange to send a corresponding code.
¤
After confirmation from the fixed line,
press the red end key T.
Special settings for calls via VoIP
or ISDN
Prerequisite: Your telephone is connected
to the ISDN network.
Activating/deactivating transfer –
ECT (Explicit Call Transfer)
If the Transfer (ECT) function is activated,
you can connect two external callers with
one another by replacing the receiver or
pressing the red end key
¢
(
page
64). This assumes that you are
making an external call via one of your VoIP
or ISDN connections and start an external
consultation call.
Please note
The transfer of the call by replacing the
receiver is not supported by all ISDN pro-
viders and PABXs.
You can activate/deactivate this function for
ISDN calls via your base.
¢
v
Ç Select Services
Transfer (ECT)
Select and press
¢
Call Waiting
§Save§
.
T
§OK§
(³ = on).
Making calls using network services
Please note
For your VoIP connections you can set
the transfer via the Web configurator
(see operating instructions for the
Web configurator on the enclosed CD;
Call Transfer).
Setting up a busy signal for when the
MSN is being used (Busy on Busy)
If this function is activated, callers immedi-
ately hear the busy tone if an external call
is already in progress via the called MSN
or VoIP connection. The waiting call is
not signalled, regardless of the setting for
¢
Call Waiting
(
page
¢
v
Ç Select Services
Busy on Busy
Select and press
Configuring settings for the
next call
Activating "anonymous calling" for
the next call (VoIP/ISDN)
You can withhold your phone number for
the next call (CLIR = Calling Line Identifica-
tion Restriction).
In idle status:
¢
v
Ç Select Services
¢
¢
Next Call
Withhold Number
Select and press
~
Enter the number or copy from
the directory.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
Generally, you can withhold your number for
¢
all calls
(
page
59).
60).
§OK§
(³ = on).
§OK§
.
61
Advertisement
Table of Contents
