Intelix DIGI-HDMI-4X2 Installation Manual
18
4. All of the remote receive baluns transmit IR commands from the included
remote control, thereby allowing remote control of the matrix itself.
Note: If the IR codes for a pass-through signal conflict with the
internal IR codes of the matrix, the processing of remote matrix IR
commands may be disabled.
Simultaneously press and hold the Output 2 Source Select and
Keylock buttons for three seconds. A single flash of the front panel
source select LEDs indicates the remote IR commands are enabled. A
double flash of the front panel source select LEDs indicates the
remote IR commands are disabled.
www.intelix.com