Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intelix DIGI-HD-8X8
Summary of Contents for Intelix DIGI-HD-8X8
- Page 1 DIGI-HD-8X8 8 input by 8 output Matrix Switcher...
-
Page 2: Table Of Contents
Intelix DIGI-HD-8X8 Installation Manual Table of Contents Overview..................... 4 Installation ..................5 Operation ................... 7 Troubleshooting and Frequenty Asked Questions......17 Technical Specifications ..............20 Warranty .................... 21 Contact Information………………………………………………… .23 Copyright 2009 Intelix LLC. Design with Intelligence www.intelix.com... -
Page 3: Important Safety Instructions
Do not block the air ventilation openings. Only mount the equipment per Intelix’s instructions. Use only with the cart, stand, tripod, bracket, table, or rack specified by Intelix or sold with the equipment. When/if a cart is used, use caution when moving the cart/equipment combination to avoid injury from tip-over. -
Page 4: Overview
In addition, the DIGI-HD-8X8 features eight pass-through IR channels which distribute remote IR commands from in-room controllers, through compatible Intelix twisted pair extenders, up to 150 feet over twisted pair cable, and out of the matrix, allowing complete control of remote sources from the destination. -
Page 5: Installation
HD-8X8. The DIGI-HD-8X8 requires 3 rack units of spacing. 2. Power-off the source and destination audio and video devices. Note: All connecting audio-visual equipment must be powered off. 3. Connect the input sources to the DIGI-HD-8X8 using high-quality HDMI cables. www.intelix.com... - Page 6 It is recommended that you leave an empty rack space above and below the DIGI-HD-8X8 for additional cooling. 4. Connect the output destinations to the DIGI-HD-8X8 using high-quality HDMI cables. 5. For long distance destinations, connect two runs of twisted pair cable per run to the DIGI-HD-8X8 (twisted pair receivers sold separately).
- Page 7 DIGI-HDMI-IR-R 150 feet 100 feet 6. Connect the included 12 VDC power supply to the DIGI-HD-8X8. 7. If controlling remotely, connect RS232, Ethernet, or IR control cables. 8. Power-on the DIGI-HD-8X8. 9. Power-on the source and destination audio and video devices.
-
Page 8: Operation
Front Panel Control The DIGI-HD-8X8 features a front panel touch screen for programming and control. 1. Determine if the DIGI-HD-8X8 front panel is locked. If the panel is locked, the System is Locked screen will appear. The user password must be entered. - Page 9 Intelix DIGI-HD-8X8 Installation Manual Touch Screen Flow Diagram *note that not all system screens are portrayed www.intelix.com...
-
Page 10: Ir Remote Control
The DIGI-HD-8X8 supports remote control through a front panel IR sensor and a rear panel 1/8” (3.5 mm) input jack. 1. If controlling the DIGI-HD-8X8 through the 1/8” (3.5 mm) input jack on the rear panel, connect the IR cable directly to the matrix. - Page 11 The DIGI-HD-8X8 supports remote control through a rear panel RS232 control port. 1. If controlling the DIGI-HD-8X8 through the RS232 control port on the rear panel, connect a straight-through serial cable directly to the matrix. Note: For RS232 programming and command information, see Appendix A.
- Page 12 Intelix DIGI-HD-8X8 Installation Manual IR Twisted Pair Pass-Through When used with compatible Intelix receivers (DIGI-HDMI-IR-R), the DIGI- HD-8X8 supports eight pass-through IR channels which distribute remote IR commands from in-room controllers, up to 150 feet over twisted pair cable, and out of the matrix.
- Page 13 Intelix DIGI-HD-8X8 Installation Manual 4. All of the remote receive baluns transmit IR commands from the included remote control, thereby allowing remote control of the matrix itself. www.intelix.com...
-
Page 14: Technical Specifications
Dimensions .................17.25” x 7.00” x 8.25” 3 RU Enclosure .....................Black metal Max Power Consumption ................. 11 watts Power......................5 VDC Regulatory .....................CE, RoHS Compatible Intelix Twisted Pair Receivers ......DIGI-HDMI-HR-R DIGI-HDMI-IR-R Shipping Weight................... 12 lbs Intelix Part Number ................ DIGI-HD-8X8 Warranty ..................... 2 years www.intelix.com... - Page 15 “xxh”, where xx are the two hex characters. ASCII values When you send commands to an Intelix Device, there is one and only one case when you use ASCII codes. That case is when you send names. Whenever a name field appears in an example in this manual, the example is enclosed in quotation marks.
- Page 16 Input Output Target Value F0h 06h Reserved Bytes The following table lists the bytes which have special meaning in all Intelix Serial Message protocols: Reserved Error ACK (Version 4 sequence bit 1) Version 3 ACK (Version 4 sequence bit 0)
- Page 17 Intelix DIGI-HD-8X8 Installation Manual Command Protocol The DIGI-HD-8X8 protocol will allow the user setup and control functions of the HDMI switcher. Note: This is a representation of the most popular commands. A complete list of commands is available in the Intelix DIGI-HD-8X8 Master Communication Protocol Manual.
- Page 18 Intelix DIGI-HD-8X8 Installation Manual Where AAh is the first character of the Password entry. AA should be sent as the hex representation of the ascii character. Where BBh is the second character of the Password entry. BB should be sent as the hex representation of the ascii character.
- Page 19 Intelix DIGI-HD-8X8 Installation Manual Where AAh is the first character of the Password entry. AA should be sent as the hex representation of the ascii character. Where BBh is the second character of the Password entry. BB should be sent as the hex representation of the ascii character.
- Page 20 Intelix DIGI-HD-8X8 Installation Manual Input Name Report (ID 2) <Description> This command is sent by the matrix to report the input name. <Example> F1h 08h 01h 02h AAh BBh CCh DDh EEh FFh Where AAh is the input number. Where BBh is the first character of the name.
- Page 21 Intelix DIGI-HD-8X8 Installation Manual <Description> This command is sent to the matrix to get an Output name. <Example> F1h 03h 01h 07h AAh Where AAh is the output number. <Reply> Output Name Report (Class 1 ID 8) <Notes> Maximum String length is 5 characters.
- Page 22 Intelix DIGI-HD-8X8 Installation Manual Get Crosspoint Status (ID 1) <Description> This command is sent to the matrix to request the current output route. The matrix will reply with the input and output combination. <Example> F1h 03h 02h 01h AAh Where AAh is the output nubmer.
- Page 23 Intelix DIGI-HD-8X8 Installation Manual <Notes> This message will reply with the current input source number for each output up to the maximum number of outputs in the matrix. Set Preset (ID 0) <Description> This command is sent to the matrix to setup a preset.
- Page 24 Intelix DIGI-HD-8X8 Installation Manual <Notes> Maximum String length is 8 characters. Transmit a space for empty characters. Get Preset Name (ID 4) <Description> This command is sent to the matrix to request a preset's name. <Example> F1h 03h 03h 04h AAh Where AAh is the preset number.
-
Page 25: Warranty
No agent or reseller of Intelix is authorized to modify this warranty or to make additional warranties on behalf of Intelix. Statements, representations or warranties made by any party other than Intelix does not constitute warranties by Intelix. - Page 26 All other standard warranty limitations apply. *Or current applicable rate/fee. Warranty terms and conditions subject to change and do not apply outside of United States and Canada. Intelix Warranty is subject to change. Please contact the factory for the most up-to-date information. www.intelix.com...
-
Page 27: Thank You For Your Purchase
Intelix DIGI-HD-8X8 Installation Manual Thank you for your purchase. We appreciate your business. Please contact us with your questions and comments. Intelix 2222 Pleasant View Road Suite 1 Middleton, WI 53562 Phone: 608-831-0880 Toll-Free: 866-4-MATMIX Fax: 608-831-1833 www.intelix.com intelix@intelix.com Copyright 2009 Intelix LLC.