Table of Contents
Advertisement
Intelix DIGI-HDMI-4X2 Installation Manual
14
3. Click the Search button. This will search the LAN for
all properly connected Intelix DIGI-HDMI series
matrices. IP addresses for connected devices will be
displayed.
4. Select the IP address of desired unit. Click the Read
Device button. The IP address of the matrix will be
replaced by the actual matrix name/model.
5. Double-click the matrix name/model. This will launch
the control window.
6. In the control window, select the desired functions
from the panel on the right side of the screen. The
corresponding action will appear in the window on the left side.
DHCP Reservations
As a DHCP enabled device, the DIGI-HDMI-4X2 will automatically receive an
IP address. However control systems require that devices have a fixed IP
address on the network. You can configure a DHCP reservation in your DHCP
server when you need to reserve a permanent IP address assignment for your
matrix.
This section describes the steps necessary to assign a DHCP reservation. The
intended audience is network administrators. If you are unable to complete this
procedure, provide the information collected in steps 1-3 to your network
administrator.
1. Verify that you are able to control your unit using the NetCtl utility as
described above.
www.intelix.com
Advertisement
Table of Contents
