Procedure 13 - De-Activate User Access Codes; Procedure 14 - De-Activate Manager Access Codes - Kaba E-Plex 5000 Operation Manual

Procedure 13 - De-activate User Access Codes

A User Code should be de-activated during a User's vacation, for example,
or if you created an Access Code but never assigned it to a User. User
codes that are inactive, but might be needed some time in the future,
should be de-activated rather than deleted.
Required User Level: Master, Manager
1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 400# to de-activate User Access Codes.
3. Enter the code 400 #NNN #, where NNN is the specific User ID
location, 023 for example.
4. Example of complete entry: 400 #023#.
5. Enter another # to indicate the end of programming.
6. You have now de-activated the User Access Code.

Procedure 14 - De-activate Manager Access Codes

A Manager Access Code should be de-activated for a certain time period
- during a Manager's vacation, for example, or if you created an Access
Code but never assigned it to a Manager. Manager Codes that might be
needed some time in the future should be de-activated rather than deleted.
Required User Level: Master
1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 401# to de-activate a Manager Access Code.
3. Enter the code 401#NNN#, where NNN is the specific Manager
ID location, 024 for example.
4. Example of complete entry: 401#024#.
5. Enter another # to indicate the end of programming.
6. You have now de-activated a Manager Access Code.
22