Table of Contents
Advertisement
Programming
7
Programming
This section describes how to program the digital cylinders.
All digital cylinders must be programmed with the required access authorisations for the user
media prior to first use and upon request. The access authorisations for user media can be
transferred to the digital cylinders by various programming methods.
7.1
Manual programming with media
Neither a PC nor programming units are required for this type of programming. The digital
cylinders can be individually programmed with the media on site, in a manual process, using
the master media. It is not possible to program time functions with this type of programming.
7.1.1 Master media
With the A master and B master media, the actuators are
programmed directly. The B masters are organised under an
A master. The master media do not have any access
authorisations.
7.1.2 User media
The user media are organised under a B master.
ATTENTION
If a user medium is lost, the authorisation data of the lost identification medium
must be blocked/deleted from all cylinders immediately. (Enter in the blacklist in
the Kaba evolo Manager software, or delete all user media with the relevant master
and then reprogram all user media).
30
k1evo805en-2012-09
User manual
Kaba digital cylinder
Advertisement
Table of Contents
