To Change The Account Numbers Registered - Minolta CF1501 Operator's Manual

9
4
After all access codes have been
registered, touch [Enter] in the Ac-
cess # Input screen, and then touch
[Enter] in the Copy Track screen.
5
In the Administrator Mode screen, touch [Exit].
6
In the Utility screen, touch [Exit].
Note
If an access code has been specified, a screen appears so that access
code can be entered. Use the keypad to enter the access code, and
then press the [Access] key to display the Basic screen and make cop-
ies. For more details, refer to "Access Codes" on page 3-28.

To change the account numbers registered

Although account numbers 1 through 99 are already registered as a de-
fault, they can be changed. Account numbers between 1 and 998 can be
registered.
Important)

A maximum of 99 account numbers can be registered at one time. Ad-
ditional accounts cannot be added.
1
In the Copy Track screen, touch
[ON], and then touch [Access # In-
put].
The Access # Input screen appears.
9-4
Administrator Mode Operations
CF1501/CF2001