Function Combination Code Keys - Minolta CF1501 Operator's Manual

12

Function combination code keys

Code Explanation
2
The functions can be combined.
●
The functions cannot be combined. (The function set first takes precedence.)
× The functions cannot be combined. (The function set last takes precedence.)
A A warning appears if manual feeding was set by touching [Paper] in the Basic
screen, then touching [Bypass]. If paper was inserted into the manual bypass tray,
the function set first is cancelled.
B These settings cannot be selected at the same time if overhead projector transpar-
encies, thick paper or postcards are set as the paper type. The setting selected first
takes precedence.
C The "Mixed Orig Detection" function, "Auto Paper" Paper setting, and "Hole-Punch"
setting cannot all be set at the same time. The first two settings selected take pre-
cedence.
D If paper is loaded into the manual bypass tray, the "OHP Interleaving" function is
cancelled. If there is no paper in the manual bypass tray, manual feeding of the pa-
per through the manual bypass tray cannot be set.
E If paper is loaded into the manual bypass tray, the "OHP Interleaving" function can-
not be set. If there is no paper in the manual bypass tray, manual feeding of paper
through the manual bypass tray is cancelled.
F The "Sort" setting is automatically changed.
When making "Single-sided ÖDouble-sided" copies while manually placing the
G
documents on the original glass, the copy job cannot be interrupted by pressing the
[Interrupt] key.
* 1: The "Staple" and "Hole-Punch" settings are only available if both the finisher and printer
controller are installed.
12-12
Appendix
CF1501/CF2001