To Make Copies Onto Thick Paper - Minolta CF1501 Operator's Manual

6
6
Specify any other necessary settings.
H
Zoom (Refer to page 6-14 for more details.)
H Original Image Type (Refer to page 6-18 for more details.)
H
Density (Refer to page 6-20 for more details.)
7
Press the [Start] key.

To make copies onto thick paper

1
Position the document(s) to be copied. (Refer to page 5-1 for more de-
tails.)
2
Select the desired color mode. (Refer to page 3-20 for more details.)
3
Open the manual bypass tray.
4
Adjust the paper guides to the size
of the paper, and then load the pa-
per so that the front side of the pa-
per faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
H
Load paper into the manual by-
pass tray with the surface to be
copied onto facing down.
5
Make sure that the screen that al-
lows you to select the manual by-
pass tray paper size is displayed,
check that the desired paper size is
selected, and then touch [Paper
Type].
6-12
Basic Operations
CF1501/CF2001