Access Codes; To Enter An Access Code; Printing From The Computer; Scanning From The Computer - Minolta CF1501 Operator's Manual

3

Access Codes

If access codes have been specified, use of the copier can be limited to
certain people or to a specified number of copies for each account.
Note
If access codes have been speci-
fied, the copier cannot be used un-
less the access code/account
number is entered first.
<Access # Input screen>
The access codes can be specified
using the "Copy Track" function of
the Administrator mode. (Refer to
page 9-1.)

To enter an access code

1
Using the keypad, enter the four-
digit access code, and then press
the [Access] key.
Do you wish to correct the en-
?
tered access code?
§
Press the [C] (clear) key to
erase the entered access code,
and then enter the correct ac-
cess code.
2
The Basic screen appears and printing can begin. Select the desired
settings.
3
After you are finished making your copies, press the [Access] key.

Printing From the Computer

If the optional printer controller is installed, the copier can be used as an
11 × 17 in. full-color printer configured into a computer network.
For operating details, refer to the manual for the printer controller.

Scanning From the Computer

If the optional printer controller is installed, the copier can be used as an
11 × 17 in. full-color scanner configured into a computer network.
For operating details, refer to the manual for the printer controller.
3-28
Before Making Copies
CF1501/CF2001