To Set The "Stabilizer" Parameter - Minolta CF1501 Operator's Manual

9

To set the "Stabilizer" parameter

If the image is incorrect, even after the gradation levels have been adjust-
ed, set the "Stabilizer" parameter. The default setting is "Stabilizer Mode".
The Stabilizer mode performs an image stabilization of the previous data
(background) to its original state.
1
In the Expert User's Mode screen,
touch [Stabilizer].
The Stabilizer screen appears.
2
Select the desired mode, and then
press the [Start] key to adjust the
stabilizer automatically.
After the stabilizer is correctly
adjusted, the Expert User's Mode
screen appears.
H First select "Stabilizer Mode". If
the image is not corrected, select
"Reset And Stabilizer Mode".
3
In the Expert User's Mode screen, touch [Exit].
4
In the Administrator Mode screen, touch [Exit].
5
In the Utility screen, touch [Exit].
6
Copy a document, and then compare the copy to the original docu-
ment. Check that the copy is correct.
9-26
Administrator Mode Operations
CF1501/CF2001