To Load Paper Into The 1St Drawer (250-Sheet Multipurpose Paper Drawer) - Minolta CF1501 Operator's Manual

10
To load paper into the 1st drawer (250-sheet multipurpose paper
drawer)
1
Pull out the paper drawer.
? Has the paper take-up roller
been touched?
§ Be careful not to touch the sur-
face of the paper take-up roller
with your hands. If the roller has
been touched, wipe it with a dry
cloth.
2
Press down on the paper-lifting
plate until it locks into place.
3
Load the paper into the drawer so
that the front side of the paper (the
side facing up when the package
was unwrapped) faces up.
? Have you loaded too much pa-
per into the drawer?
§ Do not load so much paper that
the top of the stack is higher
than the Ä mark.
Has the paper been loaded correctly?
?
§ Make sure to align the stack of paper.
? Do you wish to load a paper size or type different from that previ-
ously loaded?
§ For more details on changing the paper size and type, refer to
"Loading Paper" on page 4-7.
10-2
Touch Panel Messages
Paper take-
up roller
CF1501/CF2001