Minolta CF2001 Setup Instructions
Duplex unit cf1501/cf2001
Hide thumbs
Also See for CF2001:
- Manual (44 pages) ,
- Operator's manual (285 pages) ,
- Service manual (270 pages)
Advertisement
Quick Links
SETUP INSTRUCTIONS
WARNING
• Before setting up this unit, be sure to unplug the power cord of the copier.
• Parts inside the copier are extremely hot. Before replacing the spring, be sure to wait approxi-
mately 20 minutes after turning off the copier and checking that the area around the fusing unit
has cooled down. In addition, touching any part other than those specified may result in burns.
CAUTION
• Keep all packing materials out of the reach of children.
• Before attaching the duplex unit, be sure that optional memory M128-2 is installed.
4657-7744-12
AD-14
Duplex Unit
CF1501/CF2001
© MINOLTA CO., LTD.
Printed in Japan
NEXT
Advertisement
Related Manuals for Minolta CF2001
Summary of Contents for Minolta CF2001
-
Page 1: Duplex Unit
In addition, touching any part other than those specified may result in burns. CAUTION • Keep all packing materials out of the reach of children. • Before attaching the duplex unit, be sure that optional memory M128-2 is installed. 4657-7744-12 © MINOLTA CO., LTD. Printed in Japan... - Page 2 NEXT Duplex Unit Unpacking the Duplex Unit Preparing to Install the Duplex Unit 1. Remove the duplex unit from its box, and then check that the following accessories 1. Turn off the copier, unplug the power cord are also enclosed. and the interface cable from the copier.
- Page 3 NEXT Duplex Unit 4. Grasp the upper right-side door as shown, 7. Re-install the paper output cover. and then carefully open the door completely while making sure to support it. NOTE Be sure to support the door while carefully opening it; otherwise, it may be damaged. C4657U026AA 5.
- Page 4 NEXT Duplex Unit 3. Plug the two connectors from the duplex unit Installing the Duplex Unit into the connectors on the copier. 1. Align the two tabs on the duplex unit with the two holes in the copier, and then install the duplex unit.
- Page 5 NEXT Duplex Unit Checking and Adjusting the Paper Reference Position 5. Touch “1st.”. NOTE Perform the procedure below after adjusting the paper reference positions for the paper feed unit and the large-capacity cabinet. 1. Display the Tech. Rep. Mode screen. (For details about displaying the Tech.
- Page 6 RETURN Duplex Unit 8. Adjust the paper reference positions for the 2nd, 3rd and 4th drawers in the same way (by repeating steps 5 through 7). NOTE The 4th drawer is only available if two optional paper feed units are installed. 4657-7744-12 –...
Need help?
Do you have a question about the CF2001 and is the answer not in the manual?
Questions and answers