State
Type
Operation Key
Time Out
Activity
4.6 QoS Setting
This function provides QoS Setting of Web Smart Switch as the screen in
the QoS Setting of Web Smart Switch.
Default link group 3 includes P25, P26.
Allows to disable or enable port trunk from Web Smart Switch. The
available options are Enable and Disable. Default mode is Disable.
Allows to select port trunk type from Web Smart Switch. The available
options are LACP and Static. Default mode is LACP.
The LACP operation key must be set to the same value for ports that
belong to the same LAG.
Range: 1-65535;
Default Link Group 1: 1
Default Link Group 2: 2
Default Link Group 3: 3
The time out configuration mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout, use the
no form of this command
Long Time Out
Short Time Out
Default mode is Short Time Out.
Allows link group to automatically send LACP protocol packets or not.
Default mode is Passive.
Table 4-17 Descriptions of the Trunk Setting Screen Objects
Figure 4-38 QoS Setting Web Page Screen
User's Manual of FGSW-2620CS
. The available options are shown below:
Figure 4-38
appears and
Table 4-18
describes
- 52 -