Qos Setting - Planet FGSW-2620CS User Manual

• State
• Type
• Operation Key
• Time Out
• Activity

4.6 QoS Setting

This function provides QoS Setting of Web Smart Switch; the screen in
the QoS Setting of Web Smart Switch.
Default link group 3 is included P25, P26.
Allow disable or enable port trunk from Web Smart Switch, the available
options are Enable and Disable. Default mode is Disable.
Allow to selects port trunk type from Web Smart Switch, the available
options are LACP and Static. Default mode is LACP.
The LACP operation key must be set to the same value for ports that
belong to the same LAG.
Range: 1-65535;
Default Link Group 1: 1
Default Link Group 2: 2
Default Link Group 3: 3
The time out configuration mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout use the
no form of this command
Long Time Out
Short Time Out
Default mode is Short Time Out.
Allow link group to automatically sends LACP protocol packets or not.
Default mode is Passive.
Table 4-17 Descriptions of the Trunk Setting Screen Objects
Figure 4-38 QoS Setting Web Page Screen
User's Manual of FGSW-2620CS
, the available options are shown as below:
Figure 4-38 appears and Table 4-18 descriptions
- 51 -