Two separate 802.1Q VLANs with overlapping area scenario
1.
Based on the two separate VLAN group examples shown above, VLAN 2 and VLAN 3 member porst cannot see
each other.
2.
The member ports from VLAN 2 and VLAN 3 need to access one public server.
1.
Specify Port-7 on the Web Smart Switch that connects to the server.
2.
Assign Port-7 to both VLAN 2 and VLAN 3 on the VLAN Member configuration page as the screen in
appears.
Figure 4-29 Port 1-Port 6 802.1Q VLAN Configuration
Figure 4-30 A Server connects to the VLAN overlapping area
User's Manual of FGSW-2620CS
Figure 4-31
- 44 -