Planet FGSW-2620CS User Manual page 36

Default VLANs
The Switch initially configures one VLAN, VID = 1, called "default." The factory default setting assigns all ports on the
Switch to the "default". As new VLAN are configured in Port-based mode, their respective member ports are removed
from the "default."
Based on the Switch chipset specifications, the Switch supports SVL(Shared VLAN Learn-
ing) , and all VLAN groups share the same Layer 2 learned MAC address table.

VLAN Settings
This section provides VLAN Configuration from Web Smart Switch as the screen in
describes the VLAN Configuration object of Web Smart Switch.
The page includes the following fields:
Object
 VLAN Mode
 Apply Button
Figure 4-22 VLAN Setting Web Page Screen
Description
Provides different VLAN operation modes. The available options are shown be-
low:
No VLAN
802.1Q VLAN. Explained in section 4.4.1.
Port-based VLAN.
MTU. Explained in section 4.4.5.
Default mode is No VLAN.
Press this button to save the current configuration of Web Smart Switch.
Table 4-11 Descriptions of the VLAN Setting Screen Objects
Figure 4-22
Explained in section 4.4.3.
User's Manual of FGSW-2620CS
appears and Table 4-11
- 36 -