Factory Default; Firmware Update - Planet FGSW-2620CS User Manual

The page includes the following fields:
Object
User Name
Password
Confirm Password
Table 4-4 Descriptions of the Password Setting Web Page Screen Objects

4.2.4 Factory Default

This section shows how to reset the Web Smart Switch to factory default mode as the screen in
Press "Factory Default" button to take effect. The following screen in
login screen with default setting will show. After the default user name and password are filled out, the Web Smart Switch
management will continue its function.

4.2.5 Firmware Update

This section provides the firmware upgrade of the Web Smart Switch as the screen in
Figure 4-6 Password Setting Web Page Screen
Description
Displays the user name.
Specifies the new password. The password is not displayed. As it enters
a "" corresponding to each character is displayed in the field.
(The maximum length is 8 characters)
This confirms the new password. The password entered into this field
must be exactly the same as the password entered in the Password field.
Figure 4-7 Factory Default Web Page Screen
Figure 4-8 Factory Default Web Page Screen
User's Manual of FGSW-2620CS
Figure 4-8 appears and then another Web page
Figure 4-9
Figure 4-7 appears.
appears.
- 24 -