Specifications - Planet FGSW-2620CS User Manual

1.4 Specifications

Model
Hardware Specification
Ports
Gigabit Ports
Switch Processing Scheme
Throughput (packet per second)
Switch Fabric
Address Table
Share Data Buffer
Flow Control
Dimensions
Weight
Power Requirements
Power Consumption / Dissipation
Smart Functions
System Configuration
Port Configuration
Bandwidth Control
Broadcast Storm Control
Port Statistics
VLAN
Spanning Tree Protocol
Port Trunking
Port Mirroring
QoS
MAC Address / TCP & UDP Filter
FGSW-2620CS
s
24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
2 10/100/1000Mbps ports share with 2 SFP interfaces
Store-and-Forward
6.54Mpps@64Bytes
8.8Gbps
4K entries
2.75Mb embedded memory for packet buffers
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
440 x 120 x 44 mm (1U height)
1.61 kg
100~240V AC, 50-60 Hz, 0.5A
19.6 watts / 66.9BTU
Web interface, SNMP v1
Port speed duplex mode selection. Flow control disable / enable. Port
disable / enable. Port description on each port
Yes, 1 / 2 / 4 / 8 / 16 / 32 / 64Mbps
Yes, 5% / 10% / 25% / 50% / disable
Display each port's detailed Ethernet traffic counter information
26 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
STP, IEEE 802.1d (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Supports 2 groups of 4-port 10/ 100Base-TX trunk support, up to 800Mbps
bandwidth per trunk
Supports 1 group of 2-port 10/100/1000Mbps trunk support, up to
2000Mbps bandwidth per trunk
Port mirroring allows monitoring of the traffic across any port in real time
Allows to assign low / high priority on each port.
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy.
Yes
User's Manual of FGSW-2620CS
- 9 -