Planet FGSW-2620CS User Manual page 41

While [PC-1] transmits an untagged packet enters Port-1, the Web Smart Switch will tag it with a VLAN
1.
Tag=2. [PC-2] and [PC-3] will receive the packet through Port-2 and Port-3.
[PC-4], [PC-5] and [PC-6] receive no packet.
2.
While the packet leaves Port-2, it will be stripped away, and its tag becomes an untagged packet.
3.
While the packet leaves Port-3, it will keep as a tagged packet with VLAN Tag=2.
4.

Tagged packet entering VLAN 2
While [PC-3] transmits a tagged packet with VLAN Tag=2 entered. Port-3, [PC-1] and [PC-2] will receive
5.
the packet through Port-1 and Port-2.
While the packet leaves Port-1 and Port-2, it will be stripped away. Its tag becomes an untagged packet.
6.

Untagged packet entering VLAN 3
While [PC-4] transmits an untagged packet that enters Port-4, the switch will tag it with a VLAN Tag=3.
7.
[PC-5] and [PC-6] will receive the packet through Port-5 and Port-6.
While the packet leaves Port-5, it will be stripped away. Its tag becomes an untagged packet.
8.
While the packet leaves Port-6, it will keep as a tagged packet with VLAN Tag=3.
9.
In this example, VLAN Group 1 is set as default VLAN, but only focuses on VLAN 2,
VLAN 3 traffic flow.
Setup steps
1. Create VLAN Group:
Set VLAN Group 1 = default-VLAN with VID (VLAN ID) =1.
Add two VLANs – VLAN 2 and VLAN 3, VLAN Group 2 with VID=2, VLAN Group 3 with VID=3.
2. Assign VLAN Member :
VLAN 2 : Port-1,Port-2 and Port-3. VLAN 3 : Port-4, Port-5 and Port-6. VLAN 1: All other ports – Port-7~Port-24.
User's Manual of FGSW-2620CS
- 41 -