Ip Configuration; Password Setting - Planet FGSW-2620CS User Manual

 Idle Time Security
Table 4-2 Descriptions of the System Information Web Page Screen Objects

4.2.2 IP Configuration

This section provides change in the IP Address, Subnet Mask and Gateway as the screen in
The page includes the following fields:
Object
IP Address
Subnet Mask
Gateway
IP Configure
Table 4-3 Descriptions of the IP Configuration Web Page Screen Objects

4.2.3 Password Setting

This section provides change in the user name and password as the screen in
Set idle time and behavior.
Figure 4-5 IP Configuration Web Page Screen
Description
Assign the IP address that the network is using.
If DHCP client function is enabled, this switch is configured as a DHCP
client. The network DHCP server will assign the IP address to the switch
and display it in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.
Assign the subnet mask to the IP address.
If DHCP client function is disabled, the user has to assign the subnet
mask in this column field.
The default subnet mask is 255.255.255.0.
Assign the network gateway for the switch.
If DHCP client function is disabled, the user has to assign the gateway in
this column field.
The default gateway is 192.168.0.254.
Select static IP address or DHCP client function
When DHCP function is enabled, the Web Smart Switch will be assigned
an IP address from the network DHCP server. The default IP address will
be replaced by the assigned IP address on DHCP server. After the user
clicks Apply, a popup dialog shows up to inform the user that when the
DHCP client is enabled, the current IP will lose and user should find the
new IP on the DHCP server.
User's Manual of FGSW-2620CS
Figure 4-5 appears.
Figure 4-6 appears.
- 23 -