Pedal); Input Level - Boss GT-001 Parameter Manual

Virtual expression pedal system (Internal
Pedal / Wave Pedal)
By assigning a desired parameter to the virtual expression pedal,
you can produce an effect as though you were operating a physical
expression pedal to change the volume or tone quality in real time.
The virtual expression pedal system provides the following two
types of functions, and you can use the SOURCE setting for ASSIGN
1–8 to choose the desired type.
* If you want to use the internal pedal or wave pedal, set the
ASSIGN parameter MODE to "MOMENT. "
Internal pedal
If SOURCE is set to "INT PDL, " the virtual expression pedal will begin
operating when started by the specified trigger (INT PDL TRIGGER),
modifying the parameter specified by TARGET.
The value changes in a curve
When the trigger occurs
Wave pedal
If SOURCE is set to "WAVE PEDAL, " the virtual expression pedal will
cyclically modify the parameter specified by TARGET in a fixed wave
form.
Always changes in a fixed curve regardless of the actual pedal

Input level

Input level
The parameter set as the target changes in response to the input
level.
MEMO
If you want to adjust the input sensitivity, set the SENS.
About the Range of a Target's Change
The value of the parameter selected as the target changes
within the range defined by "Min" and "Max, " as set on the
GT-001.
When using an external footswitch, or other controller that
acts as an on/off switch, "Min" is selected with Off (CLOSED),
and "Max" is selected with On (OPEN).
When using an external expression pedal or other controller
that generates a consecutive change in the value, the value
of the setting changes accordingly, within the range set by
the minimum and maximum values. Also, when the target
is of an on/off type, the median value of the received data is
used as the dividing line in determining whether to switch it
on or off.
When using the footswitch:
MAX
MIN
OFF
When using the expression pedal:
MAX
MIN
0
When the pedal is
fully raised
When controlling the On/Off target with the expression pedal:
Value
ON
OFF
0
When the pedal is When the pedal
fully raised is advanced
halfway
* The range that can be selected changes according to the target
setting.
* When the "minimum" is set to a higher value than the "maximum, "
the change in the parameter is reversed.
* "The values of settings can change if the target is changed after
the "minimum" and "maximum" settings have been made. If
you've changed the target, be sure to recheck the "minimum"
and "maximum" settings.
MENU
ON
127
When the pedal is
fully advanced
Degree to
Which Expres-
sion Pedal Is
Depressed
127
When the pedal
is fully advanced
31