Replacing The Side Cover - IBM IntelliStation M Pro 6220 User Manual

6. If you have other options to install or remove, do so now; otherwise, replace the
7. Reconnect the external cables and power cords. Turn on the attached devices,

Replacing the side cover

If you removed the support bracket, reinstall it before you replace the side cover.
See "Removing and installing the support bracket" on page 54.
Note: The rear adapter retaining bracket rests against the computer side cover.
Complete the following steps to replace the side cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the side cover by placing it into position on the computer. Be certain that
68
IBM IntelliStation M Pro Types 6220 and 6230: User's Guide
cables connected to the computer.
Rope clip
side cover (see "Replacing the side cover").
and turn on the computer.
You might find it easier to lay the computer on its side to replace the side
cover.
seated correctly and that you have removed all work tools or parts from inside
the computer.
the lip on the bottom of the cover rests on the ledge on the bottom of the
chassis before rotating the cover up to the verticle position. Press down on the
cover-release latch as you slide the side cover forward to lock the side cover.