Removing And Installing The Support Bracket - IBM IntelliStation M Pro 6220 User Manual

4. Pull the cover-release latch away from the computer, and push the cover toward
For instructions for replacing the side cover, see "Replacing the side cover" on page
68.
Attention:
computer. Operating the computer with the cover removed might damage computer
components.

Removing and installing the support bracket

When working with some devices, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the device.
Complete the following steps to remove the support bracket:
1. Read safety information beginning on page vii and the guidelines in "Handling
2. Remove the side cover ("Removing the side cover" on page 53).
3. Pull out on the rear end of the support bracket approximately 150 mm (6 in.).
54
IBM IntelliStation M Pro Types 6220 and 6230: User's Guide
the rear of the computer. Lift the side cover off the computer and set it aside.
For proper cooling and airflow, replace the cover before turning on the
static-sensitive devices" on page 29.
94
13