IBM IntelliStation M Pro 6220 User Manual page 111

Code Function
014 Parallel port
015 USB interface
020 PCI interface
030 SCSI interface
089 Microprocessor
test
175 System thermal
180 Status display
Result Text message
Integrated parallel port
Aborted Can NOT test USB interface while it is in use.
Note: If you have USB devices attached, you
cannot run the diagnostic program for the USB
interface.
Failed Any failure message
Failed System board
Failed SCSI adapter in slot n failed register/counter/
power test
(where n is the slot number of the failing adapter)
Failed Any failure message
Failed Fan # n
(where n is the number of the failing fan)
Temperature sensed on system board is out of
range
Failed Any failure message
Action
1. Verify that the
loopback plug is
connected properly to
the external parallel
port.
2. Call for service.
1. Turn off the
computer.
2. Replace the all USB
devices with standard
devices.
3. Turn on the
computer.
4. Run the diagnostic
test again.
Call for service.
Call for service.
See the information
provided with the adapter
for instructions.
If the problem remains,
call for service.
1. Verify that the
microprocessor is
installed and seated
correctly.
2. If your computer does
not have the latest
level of BIOS code
installed, update the
BIOS code to the
latest level.
3. If the problem
remains, call for
service.
Replace the indicated
fan.
Call for service.
Call for service.
Chapter 5. Solving problems
89