The Advanced Screen - ZyXEL Communications SBG3500-N000 User Manual

The following table describes the labels in this screen.
Table 13 Add 3G Dongle Information
LABEL
Default VID
Default PID
Target VID
Target PID
Port Number
Class
Message
Content
Apply
Cancel

6.5 The Advanced Screen

Use the Advanced screen to enable or disable DSL bonding, PTM over ADSL, Annex M, and DSL
PhyR functions. The SBG3500-N supports the PhyR retransmission scheme. PhyR is a
retransmission scheme designed to provide protection against noise on the DSL line. It improves
voice, video and data transmission resilience by utilizing a retransmission buffer.
Click Network Setting > Broadband > Advanced to display the following screen.
Figure 29 Network Setting > Broadband > Advanced
The following table describes the labels in this screen.
Table 14 Network Setting > Network Setting > Advanced
LABEL
State
PTM over ADSL
Annex M
SBG3500-N000 User's Guide
DESCRIPTION
Enter the default vendor ID of the 3G dongle.
Enter the default product ID of the 3G dongle.
Enter the target vendor ID of the 3G dongle.
Enter the target product ID of the 3G dongle.
Enter the specified device port of the 3G dongle.
Enter the target device class of the 3G dongle.
Enter the input message content of the 3G dongle.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select Enable to activate DSL bonding state and use both DSL1 and DSL2 ports at the same
time to increase data transfer rate.
Select Enable to use PTM over ADSL. Since PTM has less overhead than ATM, some ISPs
use PTM over ADSL for better performance.
You can enable Annex M for the SBG3500-N to use double upstream mode to increase the
maximum upstream transfer rate.
Chapter 6 Broadband
121